SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STATe ON\|OFF\|1\|0 [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STATe?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STATe ON RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STATe?
Couplings
Preset	ON
State Saved	Yes
Initial S/W Revision	A.19.00

Power

Enter a power level in dB for the selected channel. Refer to the Output Power Calculation (Downlink) for a description of how the software applies to your power settings.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:POWer <real> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:POWer?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:POWer 0 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:POWer?
Couplings
Preset	0
State Saved	Yes
Min	-60
Max	20
Initial S/W Revision	A.19.00

RNTI

Enter a value, in decimal for the Radio Network Temporary Identifier (RNTI). RNTI value and range depends on the RNTI Type.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:RNTI?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:RNTI?
Couplings	This setting is visible when the DCI Usage is set to Scheduling NPUSCH, Scheduling NPUSCH during Random Access Procedure, or Random Access Procedure initiated by NPDCCH order; otherwise, it is read-only. When the RNTI Type (in DL-SCH) is C-RNTI or RA-RNTI, the RNTI (in DCI) is read-only, and its value changes automatically if the RNTI value in DL-SCH is modified. When the RNTI Type (in DL-SCH) is P-RNTI, the RNTI (in DCI) is read-only and fixed at 65534. When the RNTI Type (in DL-SCH) is SI-RNTI, the RNTI (in DCI) is not read-only but is fixed at 65535.
Preset	1
State Saved	Yes
Min	0
Max	65535
Initial S/W Revision	A.19.00

NPDCCH

DCI Usage

Set the DCI Usage.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:USAGe SCHednpdsch\|ULSChed\|PAGDirind\|RAR [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:USAGe?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:USAGe RAR RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:USAGe?
Couplings
Preset	RAR
State Saved	Yes
Initial S/W Revision	A.19.00

Starting OFDM Symbol

If Operation Mode is In-Band Same PCI or In-Band Different PCI, this is set to the same value as Starting OFDM Symbol in Downlink node. Otherwise it is set to 0.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STARtofdm <integer> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STARtofdm?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STARtofdm 0 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STARtofdm?
Couplings
Preset	0
State Saved	Yes
Min	1
Max	3
Initial S/W Revision	A.19.00

Starting Subframe

Enter a value of NPDCCH Starting Subframe.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STARtsubframe <integer> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:STARtsubframe?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STARtsubframe 1 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:STARtsubframe?
Couplings
Preset	1
State Saved	Yes
Min	0 (when Carrier Configuration is Non-Anchor) 1 (when Carrier Configuration is Anchor)
Max	Waveform Generation Length -1
Initial S/W Revision	A.19.00

NPDCCH Format

Set NPDCCH Format.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:FORMat F1\|F2 [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:FORMat?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:FORMat F2 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:FORMat?
Couplings
Preset	F2
State Saved	Yes
Initial S/W Revision	A.19.00

Search Space

Displays the search space for NPDCCH.

RNTI Type corresponding DL-SCH and DCI Usage determine this search space.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:SEARchspace?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:SEARchspace?
Couplings	When DCI usage is Scheduling NPUSCH/Scheduling NPDSCH/ Random Access Procedure Initiated by NPDCCH Order then NDPCCH search space value is UE specific. When DCI usage is Scheduling NPUSCH during Random Access Procedure/ Scheduling NPDSCH during Random Access Procedure then NDPCCH search space value is Type2 Common. When RNTI type is CRNTI/SIRNTI then NDPCCH search space value is UE specific. When RNTI type is RANTI then NDPCCH search space value is Type2 Common. When RNTI type is PRNTI then NDPCCH search space value is Type1 Common.
Preset	UESPecific
State Saved	Yes
Initial S/W Revision	A.19.00

NPDCCH Maximum Number of Repetitions (R_max)

Set the maximum number of Repetitions for NPDCCH (R_max).

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:MAXRep R1\|R2\|R4\|R8\|R16\|R32\|R64\|R128\|R256\|R512\|R1024\|R2048 [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:MAXREP?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:MAXREP R1 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:MAXREP?
Couplings
Preset	R1
State Saved	Yes
Initial S/W Revision	A.19.00

NPDCCH Number of Repetitions

Set the scheduled number of repetitions for NPDCCH (R).

It will be read-only false when you change the enum of NPDCCH Max Number of Repetitions.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:REPetition R1\|R2\|R4\|R8\|R16\|R32\|R64\|R128\|R256\|R512\|R1024\|R2048 [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:REPetition?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:REPetition R1 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:REPetition?
Couplings	When NPDCCH Max Number of Repetitions is - 1 -> NPDCCH Repetition is 1 and read-only 2-> NPDCCH Repetition is 1 \| 2 4 -> NPDCCH Repetition is 1 \| 2 \| 4 8 -> NPDCCH Repetition is 1 \| 2 \| 4 \| 8 16 -> NPDCCH Repetition is 2 \| 4 \| 8 \| 16 32 -> NPDCCH Repetition is 4 \| 8 \| 16 \| 32 64 -> NPDCCH Repetition is 8 \| 16 \| 32 \| 64 128 -> NPDCCH Repetition is 16 \| 32 \| 64 \| 128 256 -> NPDCCH Repetition is 32 \| 64 \| 128 \| 256 512 -> NPDCCH Repetition is 64 \| 128 \| 256 \| 512 1024 -> NPDCCH Repetition is 128 \| 256 \| 512 \| 1024 2048 -> NPDCCH Repetition is 256 \| 512 \| 1024 \| 2048
Preset	When NPDCCH Max Number of Repetitions is - 1 -> NPDCCH Repetition is 1 and read-only 2-> NPDCCH Repetition is R1 4 -> NPDCCH Repetition is R1 8 -> NPDCCH Repetition is R1 16 -> NPDCCH Repetition is R2 32 -> NPDCCH Repetition is R4 64 -> NPDCCH Repetition is R8 128 -> NPDCCH Repetition is R16 256 -> NPDCCH Repetition is R32 512 -> NPDCCH Repetition is R64 1024 -> NPDCCH Repetition is R128 2048 -> NPDCCH Repetition is R256
State Saved	Yes
Initial S/W Revision	A.19.00

NPDCCH Modulation

Displays NPDCCH Modulation type.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:MODulation?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:MODulation?
Couplings
Preset	QPSK
State Saved	Yes
Initial S/W Revision	A.19.00

NPDCCH NCCE

Set NPDCCH NCCE.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCch:NCCE?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:NCCE?
Couplings
Preset	BOTH
State Saved	Yes
Initial S/W Revision	A.19.00

DCI Contents

DCI Format

DCI Format is determined by RNTI Type and DCI Usage.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:FORMat?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:FORMat?
Couplings
Preset	N1
State Saved	Yes
Initial S/W Revision	A.19.00

DCI Data

Use the data source selection dialog box to select PN9, PN15, or user defined bits to use for the data in the transport block.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:DATA PN9\|PN15\|USER [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:DATA?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:DATA PN9 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:DATA?
Couplings
Preset	USER
State Saved	Yes
Initial S/W Revision	A.19.00

DCI Data Size

Enter a value for DCI Data size, in bits.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:DSIZe<integer> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:DSIZe?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:DSIZe 23 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:DSIZe?
Couplings	When DCI Data is Auto-Configured Bits, this setting is automatically determined and is read-only. When DCI Data is PN9, PN15, or User Defined Bits, then you need to set a value for this setting.
Preset	23
Min	1
Max	1920
State Saved	Yes
Initial S/W Revision	A.19.00

DCI Format N0/N1 Flag

Displays DCI Format N0/N1 Differentiation Flag which is Off for DCI Format N0 and On for DCI Format N1.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:FORMat:N0Noneflag?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:FORMat:N0Noneflag?
Couplings
Preset	ON
State Saved	Yes
Initial S/W Revision	A.19.00

NPDCCH Order Indicator

Displays NPDCCH Order Indicator for DCI Format N1.

If DCI Data is Auto-Configured Bits and DCI Format is N1, this setting is available and read-only. Otherwise, this setting is not available.

If DCI Usage is set to Random Access Procedure initiated by NPDCCH Order, this setting is set to On. Otherwise, it is set to Off.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDCCH:ORDind?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDCch:ORDind?
Couplings
Preset	OFF
State Saved	Yes
Initial S/W Revision	A.19.00

Scheduling Delay for DCI Format N1

Set the scheduling delay (I_Delay) for DCI Format N1.

This setting is available if DCI Data is Auto-Configured Bits and DCI Usage is set to Scheduling NPDSCH, Scheduling NPDSCH during Random Access Procedure or Random Access Response. Otherwise, this setting is not available.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:SCHDeln1<integer> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:SCHDeln1?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:SCHDeln1 0 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI: SCHDeln1?
Couplings
Preset	0
State Saved	Yes
Initial S/W Revision	A.19.00

Resource Assignment for DCI Format N1 and N2

Displays the resource assignment (I_SF) for DCI Format N1 and N2.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:RESAssn1n2?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:RESAssn1n2?
Couplings
Preset	0
State Saved	Yes
Initial S/W Revision	A.19.00

NPDSCH MCS Index

Displays NPDSCH MCS Index for DCI Format N1 and N2.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDSch:MCS?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDSch:MCS?
Couplings
Preset	0
State Saved	Yes
Initial S/W Revision	A.19.00

NPDSCH Repetition Number (I_Rep)

Displays NPDSCH Repetition Number (I_Rep) for DCI Format N1 and N2.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NPDSch:REP?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NPDSch:REP?
Couplings
Preset	0
State Saved	Yes
Initial S/W Revision	A.19.00

New Data Indicator

Turn New Data Indicator On or Off for DCI Format N0 and N1.

If this is set to On, the corresponding transmission data is new data.

If this is set to Off, the corresponding transmission data is retransmission data.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NDI ON\|OFF\|1\|0 [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:NDI?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NDI ON RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:NDI?
Couplings
Preset	ON
State Saved	Yes
Initial S/W Revision	A.19.00

HARQ-ACK Resource

Set an index of ACK/NACK resource field for reporting ACK/NACK to the UE.

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:HARQackres <integer> [SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:HARQackres ?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:HARQackres 0 RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI: HARQackres?
Couplings
Preset	0
State Saved	Yes
Min	0
Max	15
Initial S/W Revision	A.19.00

DCI Subframe Repetition Number

Displays DCI Subframe Repetition Number defined by NPDCCH Search Space, NPDCCH Maximum Number of Repetitions (R_max), and NPDCCH Number of Repetitions (R).

SCPI Command	[SOURce]:RADio:LTEFdd:WAVeform[:ARB]:CCARrier<channel>:NIOT:DLINk:DCI:SUBFrep?
SCPI Example	RADio:LTEFdd:WAVeform:CCARrier:NIOT:DLINk:DCI:SUBFrep?
Couplings
Preset	0
State Saved	Yes
Initial S/W Revision	A.19.00